MDM22-22mm modular enclosed

• MDM22-22mm modular enclosed

• MDM22-22mm modular enclosed

MDM22 magnetic encoder module consists of an encoder body and a magnet holder. The magnet holder is fitted on the rotating shaft and the encoder body in front of the magnet holder. The sensor inside the body will sense the rotating magnet and gives the Absolute as well as incremental outputs up to 14 bits per rotation.
This gives a very high speed, IP68 robust, bearing less encoder design ideally suitable for applications in harsh environments.

Salient Features:

• 22mm modular encoder with magnet holder.
• Operates on 5V power supply.
• Variety of outputs supported like Analog Sin-Cos output, Incremental RS422, Absolute SSI and BiSS-C protocol.
• Supports up to 14 bits (16384 positions) per rotation Absolute and Incremental outputs.
• Accuracy +/- 0.5°.
• High Speed operation up to 20000 rpm at finest resolution.
• 3600 CPR also available to give angular resolutions easier for mathematical calculations.

MDB28-28MM MODULAR

MDB28-28MM MODULAR

MDB28 magnetic rotary encoder module has a precision sensor having an integrated Hall element for scanning a permanent Dipole magnet. The Sensor itself generates a constant amplitude Sine and Cosine voltages that is used for angle calculations. These Sine and Cosine signals are further interpolated to get the Incremental or Absolute signals with resolutions up to 14 bits per rotation.

MDB28 module is a 28mm PCB assembly which has a wide operating voltage range suitable for many applications.

Salient Features:

• 28mm Square PCB assembly module.
• Wide operating voltage range 5V DC and 6.5V to 30V DC.
• Variety of outputs supported like Analog Sin-Cos output, Incremental RS422, Absolute SSI and BiSS-C protocol.
• Supports up to 14 bits (16384 positions) per rotation Absolute and Incremental output.
• Accuracy +/- 0.5°.
• High Speed operation up to 20000 rpm at finest resolution.
• 3600 CPR also available to give angular resolutions easier for mathematical calculations.

MDB20-20MM MODULAR BOARD TYPE ROTARY ENCODER

MDB20-20MM MODULAR BOARD TYPE ROTARY ENCODER

MDB20 magnetic rotary encoder module has a precision sensor having an integrated Hall element for scanning a permanent Dipole magnet. The Sensor itself generates a constant amplitude Sine and Cosine voltages that is used for angle calculations. These Sine and Cosine signals are further interpolated to get the Incremental or Absolute signals with resolutions up to 14 bits per rotation.
MDB20 module is a 20mm PCB assembly which can be used in any small designs with ease of installation.

Salient Features:

• 20mm Circular PCB assembly module.
• Operates on 5V power supply.
• Variety of outputs supported like Analog Sin-Cos output, Incremental RS422, Absolute SSI and BiSS-C protocol.
• Supports up to 14 bits (16384 positions) per rotation- Absolute and Incremental output.
• Accuracy +/- 0.5°.
• High Speed operation up to 20000 rpm at finest resolution.
• 3600 CPR also available to give angular resolutions easier for mathematical calculations.

PRESS BRAKE SCALE

PRESS BRAKE SCALE

The Press Brake Scale by Electronica Mechatronic Systems is fully guided environmentally sealed scale with high mounting tolerance. The high performance encoder system provides resolution from 1 - 10 µm and accuracy up to ±10 µm/m. 

The robustly design scale provides protection class of IP67 and is resistant to coolants and general chemicals found in industries. It can operate at 0° C to 50° C and can be stored from -20° C to 70° C and can operate up to speed of 60 m /min.

MG232 MAGNA - MAGNETIC ENCODER

MG232 MAGNA - MAGNETIC ENCODER

The MG232 Enclosed high speed linear encoders offer ease of installation and unsurpassed robustness to oil, dust and coolants as it comprises of IP 67 protection class. Ideally suited for shop floor and dirty environment they can be used as a direct alternative to linear optical encoders.

It provides user the benefits of both, ease of mounting of optical encoder with the robustness of magnetic measuring system, also provide measuring from 150 length up to 3040 mm. Available in 1µm and 5µm resolutions for Machine tool application, available in 0.5µm and 0.1µm resolutions for Profile Projector application.

MAGNA S1 & S2- OPEN TYPE

MAGNA S1 & S2- OPEN TYPE

Magna S1 and S2 are open type contactless encoders specially designed for harshest enviroments of machine tool industry. 

Robust with IP67 rating, optimized mounting dimension for compact spaces, these encoders are preferred choices for standard milling machines, lathe machines, grinders and HBM.

Starting from 100mm length, these encoders go upto 30mtr and beyond. Above 3 meter length, these encoders come in jointed extrusions with guided reader head.

EMC14 – ELEKTRA MAGNETIC COMPACT READER HEAD WITH 14MM HEIGHT

EMC14 Reader Head

The Magnetic Reader head and Tape forms a contactless high-Speed Measurement system. It is simple to install and highly resistant to oil, dust, dirt & vibrations, making it an ideal system to be used under harshest conditions making it most suitable for applications like Machine tool, Automation etc.

The EMC14 Sensor is a compact sensor with wide operating voltage range making it suitable for many automation applications. It comes in a resolution from 0.1µm to 100µm for pole pitches of 1mm, 2mm and 5mm. 

The EMC14 Sensor is a IP68 protection class sensor making it suitable for the harshest environments. 

Applications - Machine tool, measuring instruments, Automation, Linear motors applications, Robotics, Material handling machines, Special purpose machines, Length Cutting machines, Dispensing machines, pick and place machines and many such linear and rotary applications…

EMC25 – ELEKTRA MAGNETIC COMPACT READER HEAD WITH 25MM HEIGHT

EMC25 – ELEKTRA MAGNETIC COMPACT READER HEAD WITH 25MM HEIGHT

The Magnetic Reader head and Tape forms a contactless high-Speed Measurement system. It is simple to install and highly resistant to oil, dust, dirt & vibrations, making it an ideal system to be used under harshest conditions making it most suitable for applications like Machine tool, Automation etc.

The EMC25 Sensor is a compact sensor with wide operating voltage range making it suitable for many automation applications. It comes in a resolution from 0.244µm to 100µm for pole pitches of 2mm and 5mm. 

The EMC25 Sensor is a IP68 protection class sensor making it suitable for the harshest environments. 

Applications - Machine tool, Measuring instruments, Automation, Linear motors applications, Robotics, Material handling machines, Special purpose machines, Length cutting machines, Dispensing machines, pick and place machines and many such applications

EMR – ELEKTRA MAGNETIC READER HEAD (LEGACY PRODUCT)

EMR – ELEKTRA MAGNETIC READER HEAD (LEGACY PRODUCT)

The Magnetic Reader head and Tape forms a contactless high-Speed Measurement system. It is simple to install and highly resistant to oil, dust, dirt & vibrations, making it an ideal system to be used under harshest conditions making it most suitable for applications like Machine tool, Automation etc.

The EMR Sensor comes in a resolution from 0.1µm to 100µm for pole pitches of 1mm, 2mm and 5mm. 

The EMR Sensor is a IP67 protection class sensor making it suitable for the harshest environments. 

Applications - Machine tool, Measuring instruments, Automation, Linear motors applications, Robotics, Material handling machines, Special purpose machines, Length Cutting machines, Dispensing machines, pick and place machines and many such applications.

MAGNETIC TAPE FOR LINEAR MEASUREMENT APPLICATIONS

MAGNETIC TAPE FOR LINEAR MEASUREMENT APPLICATIONS

Magnetic Tapes consists of an extruded plastic impregnated with Barium Ferrite glued to a stainless steel tape using a special type of glue. This stainless steel tape provides the rigidity to the magnetic tape. The special glue makes sure that the thermal expansion coefficient of the glued tape is same as stainless steel tape. 

This tape is then magnetised by a fully automatic State of the art Magnetizer machine which gives a very good accurate Magnetic tape encoder, incremental as well as absolute system. These magnetic tape and reader head encoder system are highly resistance to oil, dust, dirt & vibrations, making it is an ideal system to be used under harshest conditions makes it most suitable for applications like Machine tool, Measuring instruments, Automation, Linear motors applications, Robotics, Material handling machines, Special purpose machines, Length Cutting machines, Dispensing machines, pick and place machines etc. 

The Magnetic tapes are available in 1mm, 2mm, 2.5mm, 2.56mm and 5mm pole pitches. We also support custom pole pitches and custom reference mark patterns for any special applications. We also have Absolute magnetic tapes and its suitable reader head which supports maximum length of 60 meters.